Categories

AutoCAD 2015 and AutoCAD LT 2015 Bible

The most comprehensive AutoCAD book around!

Defining alternate dimension units in AutoCAD

The dimension measurements in your drawing use a specific unit, whether millimeters, inches, or something else. But it’s common to need to show a second unit — perhaps a metric measurement if you’re using inches, or vice versa.

You define an alternate measurement on the Alternate Units tab of the Dimension Style dialog box. For more information about using this dialog box, see my tutorial, “Create an architectural dimension style.”

AutoCAD Dimension Styles Manager Alternate Units tab

Here are the steps to specify an alternate unit:

  1. Choose the unit you want from the Unit Format drop-down list.
  2. Choose the precision (decimal points or fraction denominator, usually)
  3. Notice the default 25.4 in the Multiplier for All Units text box. That’s because I have a United States version of AutoCAD and there are 25.4 millimeters in an inch. Of course, if that’s not what you want, change the multiplier value.
  4. There are text boxes to add a prefix or suffix. These are useful if the unit won’t be obvious. For example, if you main units are inches, you might want to add mm after your alternate units of milliemeters.
  5. The Zero Suppression section of the dialog box allows you to keep certain standards, such as not including 0 inches before (leading) or after (trailing) a measurement.
  6. Finally, on the right, specify if you want the alternate to appear after or below the primary measurement.

The settings you specify become part of the dimension style you are configuring.

Do you use this feature? What settings do you use?

Ellen Finkelstein

4 comments to Defining alternate dimension units in AutoCAD

  • John

    Hi Ellen,
    The default alternate unit multiplier for alt units in your dimension style is dependent upon the base units of your template.
    If you are working on a METRIC template, when you open the alternate units tab you will see that the default multiplier is .03937, and as previously mentioned if you are working on an IMPERIAL template, then that default value will be 25.4.
    I think that a fair number of people are reasonably oblivious to whether or not they are working on Imperial or Metric templates. One should always determine what dimension system is being worked in, before choosing an appropriate template for a new drawing.
    It is also a good idea to go into your OPTIONS and set your personal preference for the default QNEW template.
    Keep up the great work.

  • Al Nicks

    I’m using AutoCAD LT 2012. Sometimes I need alternate units ‘below primary value’ but I have a big gap vertically between the primary and the alternate. Is there a setting to adjust this?

  • Al Nicks

    Concerning my post of Jan. 31 2014 about alternate units: strange thing happened, when I click on a grip to move the dim – the big gap goes away! I thought it was a setting but more like a glitch.

  • Gayathri

    Hi, I am using Auto CAD 2011. I want to remove primary units and retain secondary units. Please help me over this.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>